Courier shipping nationwide
Secure Checkout
QUICK CUSTOMER SERVICE
sales@securitywholesale.co.za

IEEE 802.3af/at PoE standard 48 x Gigabit PoE Ports, 2 × gigabit RJ45, 2 x fiber optical ports Total PoE Power Budget 470W PoE Watchdog, STP/RSTP, VLAN, SNMP, QoS 104 Gbps Switching Capacity 16 K MAC Address Entries (DS-3E1552P-SI)

R14,320.00

  • IEEE 802.3af/at PoE standard
  • 48 x Gigabit PoE Ports, 2 × gigabit RJ45, 2 x fiber optical ports
  • Total PoE Power Budget 470W
  • PoE Watchdog, STP/RSTP, VLAN, SNMP, QoS
  • 104 Gbps Switching Capacity
  • 16 K MAC Address Entries
  • General
  • ShellMetal material
  • Net Weight4.35 kg (9.59 lb)
  • Gross Weight4.5 kg (9.92 lb)
  • Dimensions (W × H × D)440.00 mm × 44.00 mm × 323.80 mm (17.32” × 1.73” × 12.71”)
  • Operating Temperature0 °C to 45 °C (0 °F to 113 °F)
  • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
  • Operating Humidity5% to 95% (no condensation)
  • Relative Humidity5% to 95% (no condensation)
  • Power Supply100 to 240 VAC, 50/60 Hz, Max. 5 A
  • Installation ModeRack (equipped with mounting ears)
  • Max. Power Consumption500 W
  • Power Consumption in Idle30 W
  • Surge Protection6 KV
  • Network Parameters
  • Ports48 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
  • MAC Address Table16 K
  • Switching Capacity104 Gbps
  • Packet Forwarding Rate77.38 Mpps
  • Internal Cache12 Mbits
  • PoE Power Supply
  • PoE StandardIEEE 802.3af,IEEE 802.3at
  • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
  • PoE PortPoE: Ports 1 to 48
  • Max. Port Power30 W
  • PoE Power Budget470 W
  • Software Function
  • Long Range

    Ports 1 to 48: up to 300 m.

    Long range performance may vary depend on camera model or cable condition.

  • Port Isolation

    Ports 1 to 48: port isolation mode to improve network security.

    Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

  • PoE WatchdogPorts 1 to 48: auto detect and restart the cameras that do not respond.
  • Link Aggregation

    Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

    Support static link aggregation.

    Support 8 aggregation groups.

  • QoS

    QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.

    Support port-based priority configuration.

    Support SP, WRR priority schedule mode.

  • Loop Prevention

    Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

    Support 802.1D STP.

    Suppport 802.1w RSTP.

  • VLAN

    VLAN is used for network scale planning and network health improvement.

    Support 802.1Q.

    Configurable VLAN ID from 1-4094.

    Support Trunk, Access port mode.

    Support Max. 4094 VLAN.

  • HPP

    Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

    1. Display the port rate.

    2. Display the port bandwidth utilization rate.

    3. Display topology information.

    4. Display the alarm status.

    5. Restart ports and devices.

    6. Remotely upgrade the device.

  • System MaintenanceSupport remote upgrade, default parameter restoration, logs viewing, basic network parameter configuration, import and export configuration, and time synchronization.
  • Port Rate-LimitingPort rate-limiting is used for port bandwidth adjustment to prevent network congestion.
  • Storm Control

    Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.

    Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

  • Approval
  • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
Shopping Basket
Open chat
Hello 👋How can we help you?